Advanced Detection Systems
With glass requirements for architectural applications becoming increasingly strict, every glass maker needs to implement a strategy and investment plan to prevent costly mistakes or bad products sent to customers. SYNERGX, the world leader in non-contact inspection & metrology solutions, offers a complete and integrated platform for each stage in the glass production process as well as individual systems to address specific inspection challenges.
-
Inspection system used following the washing/drying process. It provides high quality glass processors with an integrated inline flat glass inspection solution
-
Complete inline flat glass inspection for architectural glass proceses
-
IGU lines: pre-assembly or complete unit
-
Tempering lines: bed load inspection pre or post tempering
-
Lamination lines: pre or post
-
-
Following the painting process, the SURFX PAINT is a fully automated inline inspection system for paint & print inspection on flat glass before or after drying
-
Bird friendly patterns, dot patterns, thin lines, bar codes, date code and logo inspection
-
-
The EDGE system is installed directly after seaming or on bedload prior to tempering furnace. This system is a fully automated inline inspection system for flat glass panels. It is the only continuous movement glass edge inspection system on the market
-
Surface & seaming inspection
-
Supports irregular shapes
-
-
This inspection system is made for any clear or painted glass to automate the validation process of tempered glass fragmentation based on the ECE R43 and ANSI/SAE X26.1 standards
-
Cullet analysis step of 1.0mm
-
-
The WINDX system is installed at the end of the production line. It is a multi-feature, fully automated non-contact metrology system designed for the characterization of optical properties of glazing
-
Transmissive distortion of glass panels
-
